Network Camera

Optional Motion Detector

Camera can be triggered by motion to capture images in an alarm situation. The included software lets you record all the action with snapshots, video and sound clips. You can add a network camera to your remote monitoring solution.

The sensor detects people, animals, etc., due to temperature changes. When detected, the image or a series of images is sent to you by e-mail for easy checking.

The sensor detects heat by picking up the infrared light naturally emitted from people and animals. Certain thermal environments, sunlight, air conditioners, heaters, etc., may cause detection errors or decrease the range of the sensor.

The time needed to send images by e-mail from the camera will vary depending on the condition of the network. When setting the camera to send e-mail images to a cell phone, we recommend setting a longer interval time. If the interval is set too short, more images will be e-mailed to your cell phone and therefore your cell phone charges may be higher.

When an alarm condition occurs, Trap-Snap tells the Network Camera to take a user specified number of pictures and store these pictures for later review, giving you the flexibility to view pictures of the emergency so that you can see the cause and correct them.

Privacy Mode

When you return home, just press a button to cover the lens and protect your privacy. System administrators can also do this over the network.

Remote Pan and Tilt

You can use a PC or cell phone directly to change the direction that the camera is facing while monitoring the image. This lets you monitor a large area with a single camera.

Cell Phone Monitoring

Visit our Online Store to get pricing and information on the camera.